Teng 2Pc 1/4In Hex Tx10 X 70Mm (L) | Bits & Drivers - TX Bits (70mm Long) NT AT040 - 4in Adjustable Engine

AT040 - 4in Adjustable Engine Cylinder Hone Suitable for honing cylinders from 50-180mm diameter

CUT OFF BLADES HAVE ACCURATELY GROUND BEVEL SECTION WITH CLEARANCE ANGLE AT CUTTING EDGE

- Overall Length: 247mm (9-3/4 inch) Spare Parts Available: Pin for Hook Wrench 8mm (End of Hook): HP2038-P Adaptor Complete with Pin (8mm): HP2038-PA Screw Set Pivot Pin: SC-HPL

- 131 Pieces Replacement Packs Available Part # Size Pack Qty C106-1 1/32 Suits Ford 15 C106-2 1/16 Suits Ford 10 C106-3 1/8 Suits Ford 6 C106-4 1/32 Suits GM 20 C106-5 1/16 Suits GM 20 C106-6 1/8 Suits GM 7 C106-7 1/8 Suits GM 10 C106-8 1/16 Suits HK/HT Holden 10 C106-9 1/8 Suits HK/HT Holden 6 C106-10 1/32 Suits HQ Holden 10 C106-11 1/16 Suits HQ Holden 10 C106-12 1/8 Suits HQ Holden 7

Teng 2Pc 1/4In Hex Tx10 X 70Mm (L) | Bits & Drivers - TX Bits (70mm Long) NT AT040 - 4in Adjustable EngineTeng 2Pc 1 4in Hex TX10 x 70mm (L)