Lenco 01020 LE AF/HT Electrode Holders, 200 Amp, Nylon/Glass, for 1/0 Cable, 5/32" Capacity, 8.25" L lighting certain organic vapors as well

certain organic vapors as well as non-oil and oil particulates at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces • Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode • OSHA requires that gas-proof goggles be worn with half facepiece respirators when used against formaldehyde • Not for use in environments that are immediately dangerous to life or health (IDLH)

5 HP SP2607X10/SP3015X20AZ Super Pump(R) and SP2810X152 MaxFlo(TM) Pump Series

The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing hydrogen fluoride and certain oil and non-oil based particles

First Aid Guide

Lenco 01020 LE AF/HT Electrode Holders, 200 Amp, Nylon/Glass, for 1/0 Cable, 5/32" Capacity, 8.25" L lighting certain organic vapors as wellLenco 01020 LE AF HT Electrode Holders, 200 Amp, Nylon Glass, for 1 0 Cable, 5 32" Capacity, 8. 25" L Upper and lower tongs are Made from a high copper alloy for maximum conductivity and strength Top and bottom tip insulators are a Molded fiberglass compound and will withstand intensive heat Impact Handles are Molded from a durable glass filled nylon material with a good heat and Impact resistance Oval point screw cable connection is standard on all