BE Easy Start Valve 3/8" MPT x 1/4" Barb flow_3-5-to-6gpm 11 GPM @ 3400 RPM

11 GPM @ 3400 RPM

53 gpm water flow

212° F Degrees

In general the EZ will replace the forward facing pumps and the EZ-SX will replace the rear facing pump

BE Easy Start Valve 3/8" MPT x 1/4" Barb flow_3-5-to-6gpm 11 GPM @ 3400 RPMPressure Washer Pump Easy Start Valve Easy Start Valves eliminate back pressure to reduce the load on the pump and engine so it can start easier. Prevent recoil from pump compression and having to hold the gun open when starting your pressure washer. Max Pressure: 3000psi Thread Size: 3 8" MPT, 1 4" bypass barb. Installation requires the easy start valve to be installed on the high pressure side of the pump and a bypass line to the pump inlet.